Wood Floor In Bathroom: Is It A Good Choice?
Bathrooms are created to be nature wet, moist places, and that’s why materials like tile or cut stone are popular and wooden floor are unpopular. As we know that wood is not resistant to any moisture problems. Unless properly done and sealed by professionals or prefinished specifically for a bathroom floor, wood floor in bathroom can develop moisture problems, especially under the toilet. So, if you are trying to have wooden floor for your bathroom, you have to consider some things below to make sure the floor you choose will work for a bathroom. If not, go with another choice.
The Considerations of Wood Floor in Bathroom
If you are using the existing toilet flange that’s level with the present floor, it will have to be raised up to be level with the new thicker floor. Then, you have to get flange extension kits from a good plumbing-supply house. They will attach to the present toilet drain and raise the flange height. Once you raise the flange, cut and seal all the flooring around the new flange to complete the job.
If you are completely running a new toilet drain and you have open access underneath the bathroom, it is much recommended to call a plumber to help you. Running a new toilet drain is a job for the professionals. You need to Install the wooden floor first and then mark the location for the toilet drain, making sure to avoid any floor joists. Then the plumber will drill a large hole right through the new wooden floor and the subfloor, to make a neat clean hole. A special low-profile flat flange is now screwed tightly to the new hole, and the toilet drain piping can be run underneath the floor to the new flange. This is a truly professional job. It now appears that the flange is built right into the new floor and it’s locked in place. Toilet flanges should sit level or right on top of a finished floor for a good seal. Having the flange too deep in the floor can put you in deep trouble.
There are very few species of wood which might withstand the challenges a shower or bathroom throws at it. As a result, instead of choosing for solid wood flooring in your bath or shower room, you should consider the installation of engineered wood flooring as an alternative.
Solid wood flooring, as the name suggests is made from one single plank of wood whereas engineered flooring is made up of a thin layer of real wood secured to a plywood base. Because of the structure of engineered wood flooring, it is better able to withstand the humidity and splashes and spills it will come up against in shower rooms and bathrooms. Assuming you decide to install engineered wood flooring in your bath or shower room, it is important to opt for a minimum thickness of 14mm in order to maximize the stability of your floor.
After you’ve chosen your flooring material, you’ll need to consider the fitting method to use and no matter which method you decide is best, you need to remember to be strict about respecting the 20mm gap between the planks and the walls. This gap is particularly important in shower and bathroom environments because of the expansion and contraction which will take place due to the humidity and temperature changes.
Finally, when your floor has been laid, it’s important to turn your attention to the wood flooring finish. The two main finishing options for bath and shower room floors are lacquer and hard wax oil. The advantage of lacquer is that it’ll render your floor pretty much waterproof but the downside is that it isn’t a natural product. Hard wax oil on the other hand is a natural product and will certainly help protect your floor by soaking deep into its core.
Wood floor in bathroom looks very nice to beautify your bathroom, but you should pay attention to some basic things in order to get a long lasting wooden floor for your bathroom. You must not underestimate the regular cleaning and treatment for your bathroom wooden floor.